1.5" Aluminum Round Bar 6063-T52-Extruded

The 1.5-inch 6063-T52 aluminum round bar features a larger cross-section and is suitable for structural applications that require higher load-bearing capacity. The 6063-T52 alloy offers moderate strength while maintaining good machinability and surface treatment performance, commonly used in frames, supports, transportation infrastructure, and building structures.

Diameter: 1.5 inches (approximately 38.1 mm)
Material: 6063 aluminum alloy, T52 temper
Features: Provides high strength and stability, suitable for load-bearing applications.
Uses: Building structures, support rods, and large mechanical components.

1.5" Aluminum Round Bar 6063-T52-Extruded Specifications

Specification	Details
Diameter	1.5 inches (approximately 38.1 mm)
Maximum Length	192 inches
Material	Aluminum
Shape	Bar-Round
Alloy Type	6063
Temper	T52
Production Method	Extruded

Select length below or Custom Cut

12" (1 ft.)
24" (2 ft.)
36" (3 ft.)
48" (4 ft.)
72" (6 ft.)
96" (8 ft.)
144" (12 ft.)
192" (16 ft.)
Custom cuts supported

6063 T52 Aluminum Mechanical Properties

Property	Value
Density g/cm^3	3
Ultimate Tensile Strength KSI	27
Yield Tensile Strength KSI	21
Elongation % in 2 in.	12
Rockwell Hardness B Scale	17
Melting Point °F	1140 - 1210
Brinell Hardness 500 kg load	60
Shear Strength KSI	15

Chemistry Information 6063 Aluminum

Constituentelement	Minimum(% by weight)	Maximum(% by weight)
Aluminium (Al)	97.5%	99.35%
Magnesium (Mg)	0.45%	0.90%
Silicon (Si)	0.20%	0.60%
Iron (Fe)	0	0.35%
Chromium (Cr)	0	0.10%
Copper (Cu)	0	0.10%
Manganese (Mn)	0	0.10%
Titanium (Ti)	0	0.10%
Zinc (Zn)	0	0.10%
(others)	0	0.15% total(0.05% each)