0.28125" OD x 0.014" Wall Round Aluminum Tube 3003-H14 12" Long
This aluminum tube features an outer diameter of 0.28125 inches, a wall thickness of 0.014 inches, and a length of 12 inches, made from 3003-H14 aluminum alloy. Its design offers increased strength, making it suitable for higher-demand applications such as racing and precision machinery, ensuring stability during use.
0.28125" OD x 0.014" Wall Round Aluminum Tube 3003-H14 12" Long Specifications
| Specification | Details |
| Outer Diameter | 0.28125" (7.144mm) |
| Wall Thickness | 0.014" |
| Length | 12" (304.8mm) |
| Material | Aluminum |
| Form | round tube |
| Alloy Type | 3003 |
| Max Length | 72 inches (6 feet) |
| Temper | H14 |
0.28125" OD x 0.014" Wall Round Aluminum Tube 3003-H14 12" Long Features and Applications
Features: Provides a moderate size and enhanced strength, suitable for higher strength requirements.
Applications: Used for supports, frames, and structural reinforcement.
Aluminum round tubes of different specifications are targeted at different application requirements and can provide corresponding strength, rigidity and precision, suitable for a variety of industrial and light structural environments.
Select length below or Custom Cut
- 12" (1 ft.)
- 24" (2 ft.)
- 36" (3 ft.)
- 48" (4 ft.)
- 72" (6 ft.)
- Custom cuts supported
3003 H14 Aluminum Mechanical Properties
| Alloy | Temper | Wall thickness mm | Longitudinal tensile mechanical properties at room temperature | ||||
| Tension strength Rm N/mm² | Yield strength R p0.2 N/mm² | Elongation after break/% | |||||
| Full section specimen | other samples | ||||||
| A50 mm | A50 mm | Aa | |||||
| Not less than | |||||||
| 3003 | O | All | 95-130 | 35 | - | 20 | 25 |
| H14 | All | 130-165 | 110 | - | 4 | 6 | |
Chemistry Information 3003 Aluminum
| Element | Composition (%) |
| Si | 0.60 |
| Fe | 0.70 |
| Cu | 0.05-0.20 |
| Mn | 1.0-1.50 |
| Mg | - |
| Cr | - |
| Ni | - |
| Zn | 0.10 |
| Ti | - |
| Al | Remainder |